PPM 100
Machinery Directive 2006/42/CE
Mast climbing working platforms EN-14195:98
Electromagnetic compatibility directive 89/336/EC
Low voltage directive 73/23/EC
Safety of machinery – electrical equipment of machines – part 1: General requirements EN 60204-1
DETAILS
SPECIFICATION
DETAILS
Standard electrical safties
| interlocking devices on cage doors, enclosure doors, |
| top/bottom limits |
| Over travel final limits for top/bottom ends |
| Cable jamming protection device |
| Top, bottom and emergency stops |
| Rack searching device |
| Emergency stop(on car,control boxes) |
| Power supply main switch |
| Safety device actuating detector |
| 2 Motor with gearbox and electromechanical brakes |
| Safety device |
| Floating motor plate |
| Bottom mechanical stops with buffers |
| Anti slippery floor |
| Motor protecting cover |
| Hand release break for emergency reach to nearest below floor |
SPECIFICATION
| MODEL | PPM 100 |
|---|---|
| capacity | 1000 kg. |
| speed | 30 Mtr./Min |
| Height | 150Mtr |
| Gear Rack Module | 5 |
| Safety Device | SSD 1000 |
| Mast Section | Square 450 x 450mm x 1.5m Round tube Ø60×4.5thk |
| Wall Tie interval | 6 Mtr. |
| Cable Guide interval | 6 Mtr. |
| Rectangle Cage. (Inside) | 2.0 (L) x 1.4 (W) x 2.1 (H) mtr. |
| Erection Crane | Yes, Electrical |
| HMI display | Yes(colour) |
| Floor Selection | Yes(optional) |
| Load cell | Yes(optional) |
| Electrical Data | |
| Motor Power | 2 x 6.9KW |
| VFD | 15 KW |
| Power Supply | 400V (+-5%) 50 Hz |